10L 2.6GPM Instant Gas Water Heater Flue Type Wall Mounted
Tankless Gas water heater functions
1. High-tempered glass body;
2. Flame failure protection;
3. Over temperature and over pressure safety device;
4. Anti-dry combustion & anti-frozen protection;
5. Anti-wind flow back device;
6. Accidental flameouts safety device;
7. 20' minute timer;
Product Description
| Exhaust Way |
Flue Type |
| Heat Efficiency |
≥84% |
| Use Gas Type |
LPG/NG |
| Gas pressure |
NG(2000Pa)/LPG(2800Pa)
|
| Water pressure |
0.025-0.8Mpa
|
| Heating Status |
Heating Time ≤15 seconds;Over Temperature ≤2°C; |
| |
Stability Time ≤15 seconds |
| Rated Voltage |
Ignited by battery power with voltage 3V |
|
Connection Pipe Spec
|
Water Inlet: G1/2 Pipe; |
| |
Water Outlet: G1/2 Pipe; |
| |
Gas Inlet: G1/2" Pipe |
Advantage
1. Gas water heaters are approximately twice as fast at heating water compared with electric models. While an electric heater may take an hour to heat 100 litres of water, a gas model can heat an entire 200-litre tank within an hour. This means you’re less likely to run out of hot water. For larger families, a gas heater is usually the better option because electric water heaters may have trouble keeping up with high demands for hot water.
2. Although electric heaters are more energy efficient as gas storage units suffer heat loss from the walls of the tank and exhaust gasses, electricity is more expensive that natural gas. This makes gas heaters more affordable to operate in terms of energy costs, more than balancing out the heat loss.
WARNING
Please do not install this instant gas water heater in your bathroom. You must avoid installing this heater in confined areas with low ventilation. Outdoor use is mainly recommended.
Product Tags:
|
|
10L 2.6GPM Instant Gas Water Heater Flue Type Wall Mounted Images
|
